Home / Products

adhesion promoter primer

340 PLASTOFIX 1K PLASTICS ADHESION PROMOTER

Special adhesion promoter primer suitable for application on all plastic parts of the car body excluding Polyethylene(PE). Ready for use, it is applied by a spraygun of 1,5 mm nozzle diameter. Suitable for plastic bumpers, spoilers and other structured surfaces that have been coated with BODY 950 (#950) or AUTOFLEX SPECIAL(#951). It dries within 10min and can be painted over with all paint systems.

Part Number Color Size Units
3400000000 Transparent 500ml -
3400000001 Transparent 1L -
5100000010 Transparent 400 ml Aerosol -
anticorrosion prime

320 ZINC-FILL 2K ANTICORROSIVE ADHESION PRIMER 4:1

Specially formulated 2K, adhesion promoting, anticorrosion primer. Suitable for all metal types (aluminium, galvanized steel, stainless steel, common metal). It dries fast and it can be re-coated – no sanding is necessary-, within 30-60 min. Can be painted over by all types of paint. It can be sanded with a P1000 grit sandpaper.

Part Number Color Size Units
3200400001 Red 1L 6
3200700001 Grey 1L 6
1K FILLING PRIMER

980 1K FILLING PRIMER

Fast drying 1K filling primer suitable for all kinds of paints (synthetic – single coat or base coat). Must be applied in thin layers (1,3 – 1,8mm) over sanded areas only. Can be sanded within 10-30 min. Must be diluted 50-100% with BODY ACRYL THINNER (REDUCER) (#740 NORMAL – #741 SLOW).

Part Number Color Size Units
9800700001 Grey 1L -
9800200001 Black 1L -
9800700004 Grey 4L -
HS FILLING PRIMER

P334 HB BODY PRO 4:1 HS FILLING PRIMER

HB BODY PRO P334 is a high quality acrylic – filling sealing primer for partial and full automotive refinishes. Suitable for original or old paint work and ideal for unsanded O.E.M. (E-COAT) panels. Its versatility enables both application at normal, medium and high film thickness with intermediate sanding or “wet on wet” application. Dues to its high filling power and vertical stability, higher film thickness is possible. The fast drying and excellent levelling of this primer guarantee efficient application and fast sanding. It is cured with an isocyanate based BODY HARDENER 725 FOR PRIMERS (# 725). One of its greatest advantages is that it is ready for sanding after 1-1,30h air dry @ 23 ºC (73ºF).

WARNING: BY USING HB BODY PRO A715 TURBO AX THE POT LIFE OF THE READY FOR USE MATERIAL BECOMES VERY SHORT. FOR THIS REASON THE MATERIAL MUST BE APPLIED IMMEDIATELY.

Part Number Color Size Units
3340700001 Grey 1L -
3340200001 Black 1L -
3340100001 White 1L -
3340700004 Grey 4L -
3340200004 Black 4L -
3340100004 White 4L -
992 1K ANTICORROSIVE PRIMER

992 1K ANTICORROSIVE PRIMER

High quality, 1K fast drying anticorrosive primer suitable for application over metallic and wooden surfaces. Excellent resistance to salinity, moisture and to severe weather conditions. Can be applied with a brush, roller or spray gun (1,8 mm nozzle diameter). It can be diluted 10-30% with nitro thinner (reducer) BODY ECO THINN (#767). ZINC AND LEAD CHROMATE FREE.

Part Number Color Size Units
9920900001 Brown 1Kg -
9920200001 Black 1Kg -
9920700001 Grey 1Kg -
9920200005 Black 5Kg -
9920700005 Grey 5Kg -
9920900007 Brown 20L -
9920200007 Black 20L -
9920700007 Brown 20L -
5100299200 Black 400 ml Aerosol -
5100499200 Brown 400 ml Aerosol -
5100799200 Grey 400 ml Aerosol -
960 BODY WASH PRIMER

960 BODY WASH PRIMER 1:1 – ACTIVATOR

Excellent 2K yellow primer suitable primarily to be applied over aluminium, galvanised, stainless steel and zinc coated surfaces. Mix with an oxide based hardener BODY 960 ACT (#731). Applied in one layer of 10μm (0,4mil) . Dries within 10min approx, does not require sanding and is overcoatable by any primer paint system, (except those that are polyester based, polyester materials can not be hardened).

Part Number Color Size Units
9600300001 Light Yellow 1L -
5100300050 Light Yellow 400 ml Aerosol -
welding primer

425 BODY ZINC 1K SPOT/MIG WELDING PRIMER

Zinc chromate-lead FREE anticorrosive primer with a high zinc content. Suitable for Spot and MIG Welding with excellent metal protection. Can be applied with a brush, roller or spray gun (1,4 – 1,8 mm nozzle diameter). Applied at a maximum thickness of 10-20μm(0,4-0,8 mils) . It can be diluted 25-30% with nitro thinner (reducer) BODY ECO THINN (#767).

Part Number Color Size Units
4250200001 Black 1L -
5100200060 Black 400 ml Aerosol -

What We Offer

Gem Auto Paints offers a wide variety of Automotive Paints and products

Color Solution Mixing System

We are using color solution mixing system of HB body for 1K base paint mixing. A one component solvent borne mix system consisting of high quality acrylic resin system and pigments. Add 50-70% thinner 740 Acryl Normal / 741 Acryl Slow.

  Know More
color solution

Color Solution 2K AcrylicPaint Mix system

A two component quick drying acrylic resin based paint that has high, durable gloss as well as chemical, severe weather and mechanical durability. The wide variety of shades covers almost all car manufacturers. It is cured with an isocyanate based hardener BODY HARDENER NORMAL(#720) or 722 @ 2:1 mixing ratio.

  Know More
colorsolutions

Industrial Paints

Fast drying 1K alkyd based mix system for any verity colors of paints for industrial use.

  Know More
INDUSTRIAL PAINTS